868 MHz Wireless Mbus range

  • Ambient transmitter

  • Ambient temperature transmitter
    • 80 x 80 x 23mm
    • Embedded temperature sensor
    • Working temperature: -20 / +55°C
    • Suitable for an indoor use
    • Battery life: 5 years for 5mn transmission period
    • Reference: TX TEMP AMB 700-001
 
  • Temperature and humidity transmitters

  • Temperature transmitter - embedded sensor
    • 65 x 79 x 40mm
    • Embedded temperature sensor
    • Working temperature: -20 / +55°C
    • Suitable for harsh environments (IP65)
    • Battery life: 5 years for 5mn transmission period
    • Reference: TX TEMP INS 800-001
  • Temperature transmitter – immersion probe
    • 65 x 79 x 40mm
    • External 1.5m immersion probe
    • Immersion probe working temperature: -50 / +150°C
    • Suitable for harsh environments (IP65)
    • Battery life: 5 years for 5mn transmission period
    • Reference: TX TEMP IMM 800-003
  • Temperature and humidity transmitter
    • 65 x 79 x 40mm
    • Embedded temperature sensor
    • External humidity sensor
    • Suitable for harsh environments (IP65)
    • Battery life: 5 years for 5mn transmission period
    • Reference: TX TEMP HUM 800-005
 
  • Metering transmitters

  • Pulse transmitter
    • 65 x 79 x 40mm
    • 2 pulse inputs
    • Compatible with pulse meters
    • Dry-contact interface (50ms min / 10Hz max)
    • Battery life: 5 years for 5mn transmission period
    • Reference: TX PULSE 800-009
  • Pulse transmitter – ATEX approved (gas)
    • 65 x 79 x 40mm
    • 2 pulse inputs
    • Compatible with gas pulse meters
    • Dry-contact interface (50ms min / 10Hz max)
    • Battery life: 5 years for 5mn transmission period
    • Reference: TX PULSE ATEX 800-010
  • Modbus transmitter for energy meter
    • 118 x 79 x 43mm
    • Reading of energy meters’ Modbus registers
    • Modbus RS232 and RS485 interfaces
    • Can manage up to 10 meters
    • External power supply (7.5 to 24V)
    • Reference: TX ENERGY + PULSE 800-012
 
  • Digital input transmitter (dry contact)

  • Contact transmitter – ON / OFF
    • 65 x 79 x 40mm
    • 2 dry-contact interfaces
    • Status report (ON/OFF)
    • Instantaneous message after status change
    • Battery life: 5 years for 5mn transmission period
    • Reference: TX CONTACT 800-020
 
  • Analog transmitters

  • Analog transmitter - 4/20mA interface
    • 65 x 79 x 40mm
    • Usable with 4/20 mA probes
    • Battery life: 5 years for 5mn transmission period
    • Reference: TX 4-20 800-006
  • Analog transmitter - 0-5V interface
    • 65 x 79 x 40mm
    • Usable with 0-5V probes
    • Battery life: 5 years for 5mn transmission period
    • Reference: TX 0-5V 800-007
  • Analog transmitter - 0-10V interface
    • 65 x 79 x 40mm
    • Usable with 0-10V probes
    • Battery life: 5 years for 5mn transmission period
    • Reference: TX 0-10V 800-008
 
  • Receivers – Repeater

  • Modbus receiver – RS232 interface
    • 118 x 79 x 43mm
    • RS232 interface
    • Compatible with Modbus PLC
    • Can manage up to 32 transmitters
    • External power supply (7.5 à 24V)
    • Reference: RX MODBUS RS232 900-002
  • Modbus receiver – RS485 interface
    • 118 x 79 x 43mm
    • RS485 interface
    • Compatible with Modbus PLC
    • Can manage up to 32 transmitters
    • External power supply (7.5 à 24V)
    • Reference: RX MODBUS RS485 MULTI 900-022
  • Repeater
    • 118 x 79 x 43mm
    • Very high output power
    • No configuration requested
    • No limit of repeated transmitters
    • External power supply (7.5 à 24V)
    • Reference: RX REPEATER 900-004
 
  • Accessories

  • Long range antenna
    • Frequency: 868 MHz
    • Height: 40cm
    • Cable length: 5 metres
    • Wall mounting support
    • Reference: ANT REN SMA LR 868 1000-008
  • Antenna extension cable
    • Length: 10 metres
    • SMA (M) / SMA (F)
    • RG58 cable
    • Reference: RAL REN 10M SMA 1000-009
  • ATEX cable – connection to gas meter
    • Length: 100cm
    • Connector type: female
    • Binder interface – 6 wires
    • Reference: CAB ATEX 1M 1000-026
  • 12V power supply
    • 77 x 47,5 x 26,5mm
    • Usable with receivers, repeaters and energy transmitters
    • Reference: POWER 1000-002
  • DIN Rail support
    • 77 x 47,5 x 26,5mm
    • Usable with receivers, repeaters and energy transmitters
    • Reference: DIN RAIL 1000-005