LoRa Receivers & repeater

Enless Wireless, with an expertise developed through its 12 years as a leading manufacturer of wireless radio sensors, can offer two references of LoRa receivers for Building Management Systems – BMS -. Our LoRa receivers are easy to configure thanks to their embedded IP servers. They can be connected to a PLC or to your building’s IP network (Modbus or BACnet IP). Our LoRa Enless Wireless repeater improve the signal distribution of Enless transmitters.

Easy to use and thanks to their ability to manage up to 40 sensors, you can use our receivers to build an Enless proprietary LoRa mode 100% private architecture, compatible with our Enless Wireless radio wireless sensors.

Find out more about our LoRa receivers & repeater, compatible for use mainly in EUROPE (868 MHz frequency band)

  • BACnet receiver LoRa – IP and/or MSTP
      • For use in LoRa Enless proprietary mode. Compatible with Enless transmitters only
      • 118 x 79 x 43mm
      • IP / MSTP – DHCP / BBMD interfaces
      • BACnet ASC profile
      • Can manage up to 40 transmitters
      • External power supply (7.5 to 24V)
      Reference: RX BACNET 500-312
  • Modbus receiver LoRa – IP and RTU RS485 / RS232 interfaces
      • For use in LoRa Enless proprietary mode. Compatible with Enless transmitters only
      • 118 x 79 x 43mm
      • IP and RTU RS485 / RS232 Modbus
      • Compatible with Modbus PLC
      • Can manage up to 40 transmitters
      • External power supply (7.5 à 24V)
      Reference: RX MODBUS 500-302
  • Signal repeater LoRa
      • For use in LoRa Enless proprietary mode. Compatible with Enless transmitters only
      • 118 x 79 x 43mm
      • Very high output power
      • No configuration requested
      • No limit of repeated transmitters
      • External power supply (7.5 à 24V)
      Reference: RX REPEATER 600-301