Digital Input Transmitter (dry contact)
✅ ON/OFF status report
✅ Up to 15 years autonomy
✅ IP 65 resistant enclosure for outdoor environments
✅ Replaceable battery
✅ Quick and easy to install
✅ Compact design
✅ Advanced Features : Alarms and Remote Configuration
Also available in version(s) :
Reference of the Digital Input Transmitter (dry contact)
TX CONTACT SIGFOX HP 100-012
Applications of the Transmitter
This contact/status change transmitter is specifically designed for smart building, security and industrial applications.
It meets all types of ON/OFF status change monitoring needs thanks to its two TOR inputs (binary output signal).
The main uses of contact transmitter monitoring are :
- Presence, break-in and access control :
–> Monitoring of door openings and closures in office environments, or security gates in industrial areas (warehouses, machine access, etc.). - Monitoring of machines and systems :
–> Detection of system failures, monitoring of machine operating times, level alerts, etc.
The robustness of our transmitter – IP 65 enclosure – and its high environmental tolerance (-20°C / +55°C) allow it to withstand any type of environment.
Real-time alerts from the Enless Wireless contact/status change transmitter via its two dry contact interfaces will allow you to implement quick actions in response to the received messages.
This “High Power” device incorporates powerful D-type batteries, giving the Enless transmitter a very high autonomy of up to 15 years.
Technical Specifications
| Dimensions | L 118 x H 79 x W 43 mm |
| Enclosure and IP rating | ABS IP 65 |
| Power supply | Replaceable D 3.6 V Lithium battery - Low battery alert |
| Battery autonomy / Periodicity | 5 years battery life with 20mn periodicity / Configurable periodicity |
| Configuration / Installation | Radio via downlink - from Sigfox Backend or APIs |
| Interface | 2 dry contacts |
| Inputs | 2 dry contacts - terminal block |
| LEDs | 3 LEDs |
| Advanced features | Alarms and remote configuration |
| Certification | CE |
All Enless Wireless Sigfox products incorporate an advanced configuration mode that allows you to optimise their battery performance and facilitate their use :
> You can set high and low alarm thresholds for your transmitter and have your transmitter wake up frequently and take a measurement. If the threshold is exceeded, your transmitter can send an alert frame immediately without waiting for its next shipment.
> You can remotely change your transmitter configuration from the Sigfox Backend without manual intervention or the need to restart the transmitter to take its new configuration.
Downloads
