Digital Input transmitter (dry contact)
✅ ON/OFF status report
✅ IP 65 resistant enclosure for outdoor environments
✅ Replaceable battery
✅ Quick and easy to install
✅ Up to 10 years autonomy
✅ Compact design
✅ Advanced Features : Alarms and Remote Configuration
Also available in version(s) :
Reference of the Digital Input transmitter (dry contact)
TX CONTACT SIGFOX 300-012
Applications of the transmitter
This contact/status change transmitter is specifically designed for smart building, security and industrial applications.
It meets all types of ON/OFF status change monitoring needs thanks to its two TOR inputs (binary output signal).
The main uses of contact transmitter monitoring are :
- Presence, break-in and access control :
–> Monitoring of door openings and closures in office environments, or security gates in industrial areas (warehouses, machine access, etc.).
- Monitoring of machines and systems :
–> Detection of system failures, monitoring of machine operating times, level alerts, etc.
The robustness of our transmitter – IP 65 enclosure – and its high environmental tolerance (-20°C / +55°C) allow it to withstand any type of environment.
Real-time alerts from the Enless Wireless contact/status change transmitter via its two dry contact interfaces will allow you to implement quick actions in response to the received messages.
|Dimensions||L 65 x H 79 x W 40 mm|
|Enclosure and IP rating||ABS IP 65|
|Power supply||Replaceable AA 3.6 V Lithium battery - Low battery alert|
|Battery autonomy / Periodicity||5 years battery life with 180mn periodicity / Configurable periodicity|
|Configuration / Installation||Radio via downlink - from Sigfox Backend or APIs|
|Interface||2 dry contacts|
|Inputs||2 dry contacts - Terminal block|
|Advanced features||Alarms and remote configuration|
All Enless Wireless Sigfox products incorporate an advanced configuration mode that allows you to optimise their battery performance and facilitate their use :
> You can set high and low alarm thresholds for your transmitter and have your transmitter wake up frequently and take a measurement. If the threshold is exceeded, your transmitter can send an alert frame immediately without waiting for its next shipment.
> You can remotely change your transmitter configuration from the Sigfox Backend without manual intervention or the need to restart the transmitter to take its new configuration.