Pulse Transmitter for Electric Meter – LED Optical Reader
✅ Optical reading head LED
✅ Up to 15 years autonomy
✅ Interchangeable battery
✅ Rugged IP 65 enclosure
✅ Easy to install
✅ Advanced Features: Alarms and Remote Configuration
Also available in version :
Reference of the Pulse Transmitter for Electric Meter
TX PULSE LED SIGFOX HP 100-011
Applications of the Transmitter
This pulse meter transmitter works by reading and transcribing pulsed LED flashes and is therefore compatible with electric meters (e.g., EDF/Enedis/Linky) with light diodes.
This radio transmitter allows the remote reading of the electric consumption data from the meter to which it is connected without any manual intervention. High-precision data is transmitted in radio mode to the Sigfox Cloud at a flexible frequency, configured in advance.
In other words, this transmitter will quickly and economically transform your conventional electric or water meter into a smart meter.
Thanks to the LED optical reading head, the connection to the meter is simplified and requires only a few seconds.
Continuous monitoring of your electricity and water consumption thanks to our Pulse meter transmitter will allow you to :
- drive your energy (water, electricity…) consumption
- monitor your equipment and detect leaks or electrical breakdowns
- prevent over-consumption
Optimising management of your consumption will allow you to achieve significant cost savings regardless of the size of your company and sector of activity.
This product incorporates high-performance D-type battery and gives the Enless transmitter a very high autonomy of up to 15 years.
|Dimensions||L 118 x H 79 x W 43 mm|
|Enclosure and IP rating||ABS IP 65|
|Power supply||Replaceable D 3.6 V Lithium battery - Low battery alert|
|Battery autonomy / Periodicity||5 years battery life with 30mn periodicity / Configurable periodicity|
|Configuration / Installation||Radio via downlink - from Sigfox Backend or APIs|
|Interface||Led flash optical reader|
|Pulse type||LED Flash|
|Inputs||1 pulse input|
|Advanced features||Alarms and remote configuration|
All Enless Wireless Sigfox products incorporate an advanced configuration mode that allows you to optimise their battery performance and facilitate their use :
> You can set high and low alarm thresholds for your transmitter and have your transmitter wake up frequently and take a measurement. If the threshold is exceeded, your transmitter can send an alert frame immediately without waiting for its next shipment.
> You can remotely change your transmitter configuration from the Sigfox Backend without manual intervention or the need to restart the transmitter to take its new configuration.
Related products :
- - Pulse Meter Transmitter
- - Pulse Meter Transmitter – ATEX Approved (Gas)
- - Modbus Transmitter for Energy Meter – RS232 interface
- - Modbus Transmitter for Energy Meter – RS485 interface