Temperature transmitter – 2 External contact probes (PT1000)
✅ Frequency band 868 MHz (for use mainly in EUROPE)
✅ Very long radio range
✅ IP 65 resistant enclosure for outdoor environments
✅ 2 PT1000 contact probes for remote measurements from -180°C to + 250°C
✅ Up to 15 years autonomy
✅ Quick and easy to install
✅ Replaceable battery
✅ Compact Design
Reference of the Temperature transmitter
TX TEMP CONT2 600-232
Applications of the transmitter
This Enless Wireless LoRa / LoRaWAN IP65 transmitter with two external temperature contact probes allows you to measure two temperature points (°C) simultaneously in a remote manner, on contact with surfaces.
The robustness of our transmitter – IP 65 housing – and its high environmental tolerance (probe temperature range -180°C / +250°C) allow it to withstand any type of “outdoor” environment, sometimes under extreme conditions.
Data from the sensor can be transmitted according to two radio protocols : the LoRa Enless Wireless private mode (proprietary) or the LoRaWAN mode (operated or private). To learn more about these communication protocols, see our dedicated LoRa LoRAWAN page.
Thanks to its two 2.0m probes, this temperature transmitter is especially suitable for applications such as monitoring of temperatures on inlet/outlet fluid circuits of all types and, in particular, continuous observation of sanitary hot water networks for preventing the health risk of legionella. It is also often used for temperature monitoring in cold rooms, or in agricultural environments.
This transmitter incorporates high-performance D-type batteries and thus gives it a very high autonomy of up to 15 years.
Technical Specifications
Frequency band | 868 MHz (for use mainly in EUROPE) |
Dimensions | L 118 x H 79 x W 43 mm |
Cable lenght | 2.0m |
Enclosure and IP rating | ABS IP 65 |
Power supply | Replaceable D 3.6 V Lithium battery - Low battery alert |
Battery autonomy | > 10 years battery life with 5mn periodicity |
Transmission interval | - 15 mn by default - Configurable from the receiver’s IP server in LoRa mode & via Downlink in LoRaWAN |
Configuration / Installation | Radio |
Type of sensors | Contact probes 2 wires PT 1000 |
Contact probes working temperature | - 180°C / +250°C |
Sensors accuracy | +/- 0,5°C |
Sensors resolution | 0,01°C |
LEDs | 3 LEDs |
Certification | CE |
Related products :
- - Temperature transmitter – Embedded sensor
- - Temperature transmitter – 1 External contact probe (PT1000)
- - Temperature and Humidity transmitter – External probe