Temperature Transmitter – External Contact Probe
✅ IP 65 resistant enclosure for outdoor environments
✅ PT100 contact probe for remote measurements from -70°C to + 120°C
✅ Quick and easy to install
✅ Replaceable battery
✅ Compact Design
✅ Up to 15 years autonomy
✅ Advanced Features : Alarms and Remote Configuration
Also available in version(s) :
Reference of the Temperature Transmitter
TX TEMP CONT SIGFOX HP 100-000
Applications of the Transmitter
This Enless Wireless IP65 transmitter with external temperature contact probe allows you to measure temperatures (°C data) in a remote manner, on contact with surfaces.
The robustness of our transmitter – IP 65 housing – and its high environmental tolerance (probe temperature range -70°C / +120°C) allow it to withstand any type of “outdoor” environment, sometimes under extreme conditions.
This temperature transmitter is suitable for many applications including:
- Monitoring of temperatures on inlet/outlet fluid circuits of all types and, in particular, continuous observation of sanitary hot water networks for preventing the health risk of legionella. Maintenance and operation of heat pumps.
- Temperature monitoring in cold rooms, cooling towers, refrigerated outdoor containers (chemical, agri-food industries, etc.)
- Cold chain management applied to drug storage and temperature control in hospital environments, housing structures for ageing and/or vulnerable populations.
- Supervision of HVAC (heating, ventilation, air conditioning).
High-precision °C data is retrieved using the contact probe and transmitted to the Sigfox Cloud at a flexible frequency, configured in advance. Where high and low-temperature thresholds are exceeded, these are escalated and allow for alarm triggering.
This product incorporates high-performance D-type battery and gives the Enless transmitter a very high autonomy of up to 15 years.
|Dimensions||L 118 x H 79 x W 43 mm|
|Enclosure and IP rating||ABS IP 65|
|Power supply||Replaceable D 3.6 V Lithium battery - Low battery alert|
|Battery autonomy / Periodicity||5 years battery life with 20mn periodicity / Configurable periodicity|
|Configuration / Installation||Radio via downlink - from Sigfox Backend or APIs|
|Type of sensor||Contact probe 2 wires PT 100 – cable lenght : 1,5m|
|Contact probe working temperature||- 70°C / +120°C|
|Sensor accuracy||+/- 0,5°C|
|Advanced features||Alarms and remote configuration|
All Enless Wireless Sigfox products incorporate an advanced configuration mode that allows you to optimise their battery performance and facilitate their use :
> You can set high and low alarm thresholds for your transmitter and have your transmitter wake up frequently and take a measurement. If the threshold is exceeded, your transmitter can send an alert frame immediately without waiting for its next shipment.
> You can remotely change your transmitter configuration from the Sigfox Backend without manual intervention or the need to restart the transmitter to take its new configuration.