Sigfox Z1 range      

  • Ambient transmitters

  • Ambient Temperature and Humidity Transmitter
      • 80 x 80 x 23mm
      • Embedded temperature and humidity sensors
      • Suitable for an indoor use
      • Battery life: 5 years for 3hrs transmission period
      • Data are sent to the Sigfox cloud
      Reference: TX TEMP HUM AMB SIGFOX 200-002
    See product page
 

  • Temperature transmitters

  • Temperature Transmitter – Embedded Sensor
      • 65 x 79 x 40mm
      • Embedded temperature sensor
      • Working temperature: -20 / +55°C
      • Suitable for harsh environments (IP65)
      • Battery life: 5 years for 3hrs transmission period
      • Data are sent to the Sigfox cloud
      Reference: TX TEMP INS SIGFOX 300-001
    See product page
  • Temperature Transmitter – External Contact Probe
      • 65 x 79 x 40mm
      • External 1.5m contact probe
      • Contact probe working temperature: -30 / +100°C
      • Suitable for harsh environments (IP65)
      • Battery life: 5 years for 3hrs transmission period
      • Data are sent to the Sigfox cloud
      Reference: TX TEMP CONT SIGFOX 300-002
    See product page
 

  • Metering transmitters

  • Pulse Meter Transmitter
      • 65 x 79 x 40mm
      • 2 pulse inputs
      • Compatible with pulse meters
      • Dry-contact interface (50ms min / 10Hz max)
      • Battery life: 5 years for 3hrs transmission period
      • Data are sent to the Sigfox cloud
      Reference: TX PULSE SIGFOX 300-009
    See product page
  • Pulse Meter Transmitter – ATEX Approved (Gas)
      • 65 x 79 x 40mm
      • 2 pulse inputs
      • Compatible with gas pulse meters
      • Dry-contact interface (50ms min / 10Hz max)
      • Battery life: 5 years for 3hrs transmission period
      • Data are sent to the Sigfox cloud
      Reference: TX PULSE ATEX SIGFOX 300-010
    See product page
  • Modbus Transmitter for Energy Meter – RS232 interface
      • 118 x 79 x 43mm
      • Reading of energy meters’ Modbus registers
      • Modbus RS232 interface
      • Can manage up to 50 registers
      • External power supply (7.5 to 24V maximum)
      • Data are sent to the Sigfox cloud
      Reference: TX ENERGY RS232 + PULSE SIGFOX 300-013
    See product page
  • Modbus Transmitter for Energy Meter – RS485 interface
      • 118 x 79 x 43mm
      • Reading of energy meters’ Modbus registers
      • Modbus RS485 interface
      • Can manage up to 10 meters
      • External power supply (7.5 to 24V maximum)
      • Data are sent to the Sigfox cloud
      Reference: TX ENERGY RS485 + PULSE SIGFOX 300-014
    See product page
 

  • Digital input transmitter (dry contact)

  • Digital Input Transmitter (dry contact)
      • 65 x 79 x 40mm
      • 2 dry-contact interfaces
      • Status report (ON/OFF)
      • Instantaneous message after status change
      • Battery life: 5 years for 3hrs transmission period
      • Data are sent to the Sigfox cloud
      Reference: TX CONTACT SIGFOX 300-012
    See product page
 

  • Accessories

  • ATEX cable – connection to gas meter
      • Length: 100cm
      • Connector type: female
      • Binder interface – 6 wires
      Reference: CAB ATEX 1M 1000-026
  • 12V power supply
      • 77 x 47,5 x 26,5mm
      • Usable with receivers (WMBus 169MHz range) , repeaters (WMBus 169MHz range) and energy transmitters
      Reference: POWER 1000-002
 

  • Replacement batteries

  • Battery 3,6 V AA type 2200 mAH Molex
      • Battery suitable for Ambient Transmitters
      • Compatibility with both Sigfox Standard range and Wireless M-Bus 868 MHz range
      Reference: BAT AA MOLEX CONNECTOR 1000-014
  • Battery 3,6 V type AA 2200 mAH
      • Battery suitable for all transmitters except Atex and Ambient range
      • Compatibility with both Sigfox Standard range and Wireless M-Bus 868 MHz range
      Reference: 1000-013 BAT AA
  • Battery 3,6 V AA type 2600 mAH
      • Battery suitable for Pulse Atex transmitters
      • Compatibility with both Sigfox Standard range and Wireless M-Bus 868 MHz range
      Reference: 1000-012 BAT ATEX AA