LoRa Easy HTTP Receiver
Data from your Enless sensors sent in JSON format to an HTTP endpoint
Optimized for Niagara
The HTTP receiver is designed to allow you to send data from your Enless sensors directly to an HTTP server. All of this data is transmitted in JSON format. The HTTP receiver integrates seamlessly with the Niagara framework. A driver is available to help you integrate the receiver into Niagara.
Enless sensor data
in JSON format to an HTTP endpoint
LoRa Easy Protocol
The receiver supports the LoRa Easy protocol LoRa Easy Enless proprietary protocol)
50 supported sensors
The LoRa Easy HTTP receiver LoRa Easy support up to 50 Enless sensors
POST in JSON format
Send data from Enless sensors in JSON format to an HTTP server
Super-easy setup
1. Access the server
The sensors and receiver are configured using a configuration server built into the receiver. Designed with system integrators in mind, its interface has been simplified to the extreme to save you valuable time on-site. Pairing your Enless sensors with your HTTP receiver is thus a lightning-fast and completely intuitive process.
2. Pair your sensors
Pairing the receiver with your Enless sensors is a quick two-step process: simply enter the sensor IDs on the embedded server, then power them on. As soon as the sensors are powered on, communication between the devices is established instantly. From the server, you can then verify in real time that data is being received correctly and immediately check the quality of the radio link using the signal level display.
3. Post in JSON
The HTTP receiver performs a single function: it sends the received data to an HTTP server in JSON format. This provides you with a single point of access to retrieve all the information sent by the sensors. Thanks to this centralized and direct transmission, you avoid the need for Modbus addressing or BACnet object selection. Data analysis becomes incredibly simple.
Electrical Panel Installation
Compatible sensors
Enless LoRa sensors are natively decoded by the LoRa Easy BACnet receiver. Save time and money by using our LoRa Easy receivers, LoRa Easy natively decode data frames from Enless sensors and convert them into BACnet objects.
