Pulse Meter sensor Wireless M-Bus – ATEX Approved (Gas)
Reference : TX PULSE ATEX 400-006
Applications of the transmitter
This pulse transmitter has been specially designed for pulse counting applications on gas meters with a dry contact interface.
ATEX approved – Explosives Atmospheres – Zone 0, this transmitter allows the remote reading of the data from the gas meter to which it is connected without any manual intervention. Accurate and reliable data is transmitted from the transmitter to the Modbus receiver, which is usually connected to a gateway. The periodicity of sending data is configurable.
In other words, this transmitter will quickly and economically transform your conventional gas meter into a smart meter.
Continuous monitoring of your gas consumption will allow you to:
- drive your gas consumption
- monitor your equipment and detect leaks
- prevent over-consumption
Optimising management of your consumption will allow you to achieve significant cost savings regardless of the size of your company and sector of activity.
This product incorporates high-performance D-type battery and gives the Enless transmitter a very high autonomy of up to 15 years.
An ATEX Binder interface cable can be connected to this transmitter for easy implementation. See Accessories.
Technical Specifications
| Dimensions: | L 118 x H 79 x W 43 mm |
| Compatibility: | Pulse meters |
| Pulse type: | 50 ms minimum pulse width - Max 10 Hz |
| Enclosure and IP rating: | ABS IP 65 |
| Inputs: | 2 inputs |
| Power supply: | Replaceable D 3.6 V Lithium battery - Low battery alert |
| Configuration / Installation: | Radio - Field Configuration Tool (F.C.T. software) |
| Battery autonomy / Periodicity: | 5 years battery life with 5mn periodicity / Configurable periodicity from 1 to 250 mn |
| LEDs: | 3 LEDs |
| Certifications: | CE & ATEX : II 1G Ex ia IIC T3 Ga (Zone 0) |
