US915 LoRa Modbus master transmitter

Reference : TX MODBUS 600-141

For use only with Enless LoRa mode
Reading / Writing to maximum of 60 registers
Communication with up to 10 slaves
Power supply 7.5 - 24 V
Very long radio range

Applications of the Modbus master transmitter

The Enless Modbus master transmitter can read / write up to 60 Modbus registers (16 or 32 bit), distributed over a maximum of 10 separate slaves.
The Enless TX MODBUS is only compatible with the Enless LoRa mode (not LoRaWAN compatible).

The Enless Modbus master transmitter and the Enless Modbus receiver communicate by radio, making it possible to:

Read the Modbus registers and send the data to the Enless receiver
Write in the Modbus registers at the command of the Enless receiver

This device is particularly well suited to Modbus based remote energy meter reading applications, but it can also be adapted for reading / writing Modbus registers in a number of other applications (air conditioning, rooftop, etc.).

The Enless Modbus master Transmitter power supply is external – 7.5 to 24V.

Technical Specifications

Protocol :	US915 Enless LoRa mode (not LoRaWAN compatible)
Dimensions :	L 118 x H 79 x D 43 mm
Enclosure IP rating :	NEMA 2 / IP60
Application :	Reading/Writing on 60 Modbus registers max
Number of managed slaves :	10 maximum
Interface :	RS485
Power supply :	From 7.5 to 24 V DC
Mounting :	Wall / Collar / DIN rail
Status LED’s :	5 LEDs and 1 external power LED
Certifications :	FCC / ISED