Enless offers a wide range of LoRa(WAN) sensors dedicated to remote meter reading (water, electricity, gas, energy…) and energy consumption optimization. The collected data allows for a time saving compared to manual meter reading, as well as immediate responsiveness in case of leaks or consumption peaks. Enless LoRa(WAN) transmitters can be deployed on a LoRaWAN network (public or private), and can also transmit data to a Modbus or BACnet receiver for simplified integration into an automation system / Building Management System (BMS).
Discover our full range of LoRa(WAN) meter reading sensors.
Reference : TX PULSE ATEX 600-037
Find out more
Reference : TX PULSE LED 600-038
Find out more
Reference : TX PULSE LED 600-138
Find out more
The transmitter data is sent to the LoRaWAN operator’s cloud. Each transmitter must be provisioned with a subscription from the operator to be able to send its data to the cloud. The sensor information can then be processed by IoT platforms that retrieve the raw values from the cloud and format them accordingly.
The sensors’ data is sent to a LoRaWAN gateway (e.g., Kerlink, Multitech, Cloudgate, Wattsense… or others). The LoRaWAN gateway centralizes the sensor data and provides the information on a server or a BMS. In general, LoRaWAN gateways do not decode sensors’ payload so this job has to be done by the system integrator. Please note: Enless Wireless does not market LoRaWAN gateways.
The Enless sensors communicate via radio with an Enless receiver (Modbus or BACnet). A receiver can manage up to 50 Enless sensors. The radio distance in open field between a sensor and a receiver is approximately 4km. The receiver is then connected to the controller / Building Management System (BMS) and provides data from the Enless sensors. This mode of operation allows any system integrator an extremely simple transfer of Enless sensor data to a BMS.
