EU868 LoRa Actuator transmitter – 2 inputs & 4 outputs

Reference : TX IO 600-040

LoRa Actuator transmitter – 2 inputs and 4 outputs

Can only be used in Enless proprietary LoRa mode
ON/OFF status report 2 inputs
Can handle 4 relay outputs
Power supply 7.5 - 24V
Very long radio range
Quick configuration via embedded server

Applications of the actuator transmitter

The Enless Wireless TX IO LoRa transmitter is a remote actuator. With its 2 dry contact inputs and 4 relay outputs , it allows you access to contact status (open/closed) reports, as well as giving you remote control over your equipment (ex: valves, air heaters, etc.).

The TX IO transmitter is only compatible with our Enless proprietary LoRa mode. There are three operating modes:

Remote control mode
The transmitter dialogues with an Enless receiver (Modbus or BACnet).
It supplies status reports for the 2 inputs to the receiver and can control its 4 relay outputs with commands sent by the receiver.
Local control mode
The outputs are controlled based on inputs status by means of scenarios configured at the TX IO level.
D2D (Device to Device) mode
The TX IO dialogues directly with up to 4 other Enless LoRa transmitters.
The outputs are controlled on the basis of the thresholds configured in the sensors it dialogues with.

The TX IO transmitter is powered externally – 7.5 to 24V.

Technical Specifications

Protocol :	EU868 Enless LoRa proprietary (not LoRaWAN compatible)
Dimensions :	L 118 x H 79 x D 43 mm
Enclosure IP rating :	ABS IP 60
Application :	Remotely pilot relay outputs
Inputs / Outputs :	2 dry-contact inputs / 4 relay outputs
Relay characteristics :	48V / 500mA
Power supply :	From 7.5 to 24V DC
Mounting :	Wall / Collar / DIN rail
LED’s :	10 LED’s and 1 external power LED
Certifications :	CE & UKCA