Home | Produits | Temperature sensor Wireless M-Bus – External contact probe

Temperature sensor Wireless M-Bus – External contact probe

Reference : TX TEMP CONT 800-022

Transmetteur de Température – Sonde de contact externe
  • Very long radio range
  • IP 65 resistant enclosure for outdoor environments
  • PT100 contact probe for remote measurements from -30°C to + 100°C
  • Up to 15 years autonomy
  • Replaceable battery
  • Quick and easy to install

Applications of the transmitter

This Enless Wireless IP65 transmitter with external temperature contact probe allows you to measure temperatures (°C data) in a remote manner, on contact with surfaces.
The robustness of our transmitter – IP 65 housing – and its high environmental tolerance (probe temperature range -30°C / +100°C) allow it to withstand any type of “outdoor” environment, sometimes under extreme conditions.

This temperature transmitter is suitable for many applications including :

  • Monitoring of temperatures on inlet/outlet fluid circuits of all types and, in particular, continuous observation of sanitary hot water networks for preventing the health risk of legionella. Maintenance and operation of heat pumps.
  • Temperature monitoring in cold rooms, cooling towers, refrigerated outdoor containers (chemical, agri-food industries, etc.)
  • Cold chain management applied to drug storage and temperature control in hospital environments, housing structures for ageing and/or vulnerable populations.
  • Supervision of HVAC (heating, ventilation, air conditioning).

High-precision °C data is retrieved using the contact probe and transmitted to the Enless Wireless Modbus receiver connected to a gateway at a pre-configured flexible periodicity. Where high and low temperatures are exceeded, alerts are stored into the Modbus table of the PLC and can be viewed via a specific supervision system.

This product incorporates high-performance D-type battery and gives the Enless transmitter a very high autonomy of up to 15 years.

Technical Specifications

Dimensions: L 118 x H 79 x W 43 mm
Type of sensor: Contact probe 2 wires PT 100 (cable lenght : 1,5m)
Contact probe working temperature: - 30°C / +100°C
Battery autonomy / Periodicity: 5 years battery life with 5mn periodicity / Configurable periodicity from 1 to 250 min
Enclosure and IP rating: ABS IP 65
Power supply: Replaceable D 3.6 V Lithium battery - Low battery alert
Configuration / Installation: Radio - Field Configuration Tool (F.C.T. software)
Sensor accuracy: +/- 0,5°C
Sensor resolution: 0,01°C
LEDs: 3 LEDs
Certification: CE


Any project, need a quote? Our team will answer you within 24 hours

    *Required information

    I accept the general terms and conditions of use. Your data is collected and processed in accordance with our personal data policy. More information