We offer a complete range of Wireless M-Bus intelligent sensors operating in the 169 MHz radio frequency band, free of use.
This is a very low energy technology and is perfectly suited to applications for monitoring very large buildings.
Access the applications in the range :
Comfort & indoor air quality sensors
Reference : TX TEMP HUM AMB 700-022
Find out more
Reference : TX C02 TEMP HUM AMB 700-023
Find out more
Temperature sensors
Smart metering sensors
Reference : TX PULSE ATEX 400-006
Find out more
Industrial sensors
Receivers & repeater
Replacement Batteries
The transmitter data is sent to the LoRaWAN operator’s cloud. Each transmitter must be provisioned with a subscription from the operator to be able to send its data to the cloud. The sensor information can then be processed by IoT platforms that retrieve the raw values from the cloud and format them accordingly.
The sensors’ data is sent to a LoRaWAN gateway (e.g., Kerlink, Multitech, Cloudgate, Wattsense… or others). The LoRaWAN gateway centralizes the sensor data and provides the information on a server or a BMS. In general, LoRaWAN gateways do not decode sensors’ payload so this job has to be done by the system integrator. Please note: Enless Wireless does not market LoRaWAN gateways.
The Enless sensors communicate via radio with an Enless receiver (Modbus or BACnet). A receiver can manage up to 50 Enless sensors. The radio distance in open field between a sensor and a receiver is approximately 4km. The receiver is then connected to the controller / Building Management System (BMS) and provides data from the Enless sensors. This mode of operation allows any system integrator an extremely simple transfer of Enless sensor data to a BMS.
